Lexibulin (CYT997)

別名:SRI-32007

Lexibulin (CYT997, SRI-32007) is a potent microtubule polymerization inhibitor with IC50 of 10-100 nM in cancer cell lines. Phase 2.

Lexibulin (CYT997)化学構造

CAS No. 917111-44-5

サイズ 価格(税別) 在庫状況
JPY 25500 国内在庫あり
JPY 48000 国内在庫あり

代表番号: 045-509-1970|電子メール:[email protected]
よく尋ねられる質問

文献中Selleckの製品使用例(8)

カスタマーフィードバック4

製品安全説明書

現在のバッチを見る: S219502 DMSO] 86 mg/mL] false] Ethanol] 86 mg/mL] false] Water] Insoluble] false 純度: 99.6%
99.6

Lexibulin (CYT997)関連製品

Microtubule Associated阻害剤の選択性比較

生物活性

製品説明 Lexibulin (CYT997, SRI-32007) is a potent microtubule polymerization inhibitor with IC50 of 10-100 nM in cancer cell lines. Phase 2.
Targets
Microtubules (cancer cell lines) [1]
10 nM-100 nM
In Vitro
In vitro CYT997 (1 μM) treatment for 24 hours in A549 cells induces rapid reorganization of microtubules including the destruction of the existing microtubule network and accumulation of tubulin in plaques within the cytoplasm of some cells, leading to significant cell morphology alterations including the loss of adhesion and cell rounding. CYT997 displays potent cytotoxic activity against a range of 16 cancer cells with IC50 ranging from 9 nM for HepG2 to 101 nM for KHOS/NP. Especially, CYT997 exhibits potent activity against HCT15 cells, known to possess the multidrug resistance mechanism Pgp (MDR+), with IC50 of 52 nM. Through inhibition of microtubule polymerization, CYT997 blocks the cell cycle at the G2-M boundary, and induces an increase in phosphorylated Bcl-2 and increased expression of cyclin B1, as well as caspase-3 activation and the generation of poly (ADP-ribose) polymerase. CYT997 treatment causes a rapid and reversible increase in the permeability of HUVEC monolayers with IC50 of ~80 nM at 1 hour of exposure. [1] Consistent with the disruption of cellular tubulin, CYT997 potently inhibits proliferation, induces cell cycle arrest and most importantly apoptosis of both human myeloma cell lines (HMCLs) and primary MM cells. [2]
Kinase Assay Turbidimetric assay for tubulin polymerization
The effect of CYT997 on microtubule polymerization is determined using conventional turbidimetric assay using bovine neuronal tubulin in which the assembly of microtubules is monitored by an increase in absorbance at 340 nm. Increasing concentrations of CYT997 is added to 100 μL of tubulin/GTP/glycerol. Turbidimetric assays of microtubule assembly is done by incubating bovine microtubule protein in cuvettes at 37 °C in a thermostatically controlled spectrophotometer measuring the change in absorbance at 340 nm over time in PEM buffer [80 nM PIPES (pH 6.9), 2 mM MgCl2, 0.5 mM EGTA, and 5% glycerol].
細胞実験 細胞株 DU145, A549, Ramos, KHOS/NP, A375, HCT-15, HT1376, BT-20, A431, PA-1, U937, HepG2, TF-1, Baf3/TelJAK2, PC3, and K562
濃度 Dissolved in DMSO, final concentrations ~1 μM
反応時間 ~72 hours
実験の流れ Cells are exposed to various concentrations of CYT997 for ~72 hours. Cell proliferation is assessed with either the Alamar blue or MTT assays. For MTT assays, 5 mg/mL of MTT is added to all wells, plates are incubated for 6 hours at 37 °C, and then lysis buffer is added (10% SDS in 0.01 N HCl) and absorbance is measured at 620 nm in a BMG Technologies Lumistar or Polarstar plate reader. For Alamar blue assays, Alamar blue (10 μL/well) is added to each well and the plates are incubated at 37 °C for 4 hours. The fluorescence is then measured using a fluorescence plate reader with an excitation filter at 544 nm and an emission filter at 590 nm. For cell cycle analysis, cells are fixed and permeabilized with 70% ethanol in PBS and incubated at 4 °C overnight. RNase-treated samples (10 μg RNase/mL for 20 minutes at 37 °C) are stained with propidium iodide (5 μg/mL) at 4 °C for a minimum of 10 minutes. Cell cycle variables are determined by fluorescence-activated cell sorting (FACS) analysis using a Beckman-Coulter Quanta SC MPL system and analyzed using CXP Software. For apoptosis analysis, cells are detached and collected. Annexin staining is done using the Vybrant Apoptosis Assay Kit. Cells are stored on ice and analyzed on a Beckman Coulter Quanta MPL within 1 hour of preparation. Annexin V–positive cells are determined using two-channel analysis.
In Vivo
In Vivo The half-life of CYT997 for oral administration (2.5 hours) to rats is slightly longer than that for intravenous administration (1.5 hours), with the absolute oral bioavailability being 50% to 70%. Oral administration of CYT997 induces dose-dependent inhibition of tumor growth of PC3 xenografts in mice, more potently compared with paclitaxel. CYT997 is also effective in an orthotopic syngeneic model using the mouse breast cancer 4T1 cells, which are some refractory to Paclitaxel treatment. A single dose of CYT997 (7.5 mg/kg, i.p.) reduces tumor blood flow significantly at 6 hours in liver metastases, to a similar extent as the positive control CA4P dosed at 100 mg/kg. [1] CYT997 treatment (15 mg/kg/day) significantly prolongs the survival in a murine model of aggressive systemic myelomatosis. [2]
動物実験 動物モデル Male nude mice inoculated s.c. with PC3 cells, and female BALB/c mice inoculated with 4T1 cells
投与量 ~30 mg/kg/day
投与経路 Oral gavage thrice a day
NCT Number Recruitment Conditions Sponsor/Collaborators Start Date Phases
NCT00650949 Terminated
Glioblastoma Multiforme
Gilead Sciences
November 2009 Phase 1|Phase 2
NCT00664378 Terminated
Relapsed and Refractory Multiple Myeloma
Gilead Sciences
January 2008 Phase 2

化学情報

分子量 434.53 化学式

C24H30N6O2

CAS No. 917111-44-5 SDF Download Lexibulin (CYT997) SDFをダウンロードする
Smiles CCCC(C1=CN=CC=C1)NC2=NC(=NC=C2C)C3=CC(=C(C=C3)NC(=O)NCC)OC
保管

In vitro
Batch:

DMSO : 86 mg/mL ( (197.91 mM); 吸湿したDMSOは溶解度を減少させます。新しいDMSOをご使用ください。)

Ethanol : 86 mg/mL

Water : Insoluble

モル濃度計算器

in vivo
Batch:

Add solvents to the product individually and in order.

投与溶液組成計算機

実験計算

モル濃度計算器

質量 濃度 体積 分子量

投与溶液組成計算機(クリア溶液)

ステップ1:実験データを入力してください。(実験操作によるロスを考慮し、動物数を1匹分多くして計算・調製することを推奨します)

mg/kg g μL

ステップ2:投与溶媒の組成を入力してください。(ロット毎に適した溶解組成が異なる場合があります。詳細については弊社までお問い合わせください)

% DMSO % % Tween 80 % ddH2O
%DMSO %

計算結果:

投与溶媒濃度: mg/ml;

DMSOストック溶液調製方法: mg 試薬を μL DMSOに溶解する(濃度 mg/mL, 注:濃度が当該ロットのDMSO溶解度を超える場合はご連絡ください。 )

投与溶媒調製方法:Take μL DMSOストック溶液に μL PEG300,を加え、完全溶解後μL Tween 80,を加えて完全溶解させた後 μL ddH2O,を加え完全に溶解させます。

投与溶媒調製方法:μL DMSOストック溶液に μL Corn oil,を加え、完全溶解。

注意:1.ストック溶液に沈殿、混濁などがないことをご確認ください;
2.順番通りに溶剤を加えてください。次のステップに進む前に溶液に沈殿、混濁などがないことを確認してから加えてください。ボルテックス、ソニケーション、水浴加熱など物理的な方法で溶解を早めることは可能です。

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

大学・企業名を記入してください
名前を記入してください
電子メール・アドレスを記入してください 有効なメールアドレスを入力してください
お問い合わせ内容をご入力ください
Tags: Lexibulin (CYT997)を買う | Lexibulin (CYT997) ic50 | Lexibulin (CYT997)供給者 | Lexibulin (CYT997)を購入する | Lexibulin (CYT997)費用 | Lexibulin (CYT997)生産者 | オーダーLexibulin (CYT997) | Lexibulin (CYT997)化学構造 | Lexibulin (CYT997)分子量 | Lexibulin (CYT997)代理店