Integrin α4 Rabbit mAb

Catalog No.: F3037

サイズ（液体）	価格(税別)	在庫状況
50uL	JPY 23500	国内在庫なし(納期7~10日)
100uL	JPY 35500	国内在庫なし(納期7~10日)
100uL*2	JPY 53500	お問い合わせ

代表番号: 045-509-1970\|電子メール：sales@selleck.co.jp よく尋ねられる質問

使用情報

Dilution
WB1:1000 IP1:100 IF1:200 FCM1:200

Application
WB, IP, IF, FCM

Source
Rabbit

Reactivity
Human, Mouse, Rat

Storage Buffer
PBS, pH 7.2+50% Glycerol+0.05% BSA+0.01% NaN3

Storage (from the date of receipt)
-20°C (avoid freeze-thaw cycles), 2 years

Predicted MW Observed MW
70 kDa, 140 kDa, 150 kDa 70 kDa, 140 kDa, 150 kDa
^*なぜ予測分子量と実際の分子量が異なるのか？下記の原因により、実際の分子量が予測と異なる：タンパク質の翻訳後修飾（リン酸化/糖鎖付加），スプライシングバリアント，イソフォーム，相対的な電荷，ポリマー。

プロトコール

IF
Experimental Protocol: Sample Preparation 1. Adherent Cells: Place a clean, sterile coverslip in a culture dish. Once the cells grow to near confluence as a monolayer, remove the coverslip for further use. 2. Suspension Cells: Seed the cells onto a clean, sterile slide coated with poly-L-lysine. 3. Frozen Sections: Allow the slide to thaw at room temperature. Wash it with pure water or PBS for 2 times, 3 minutes each time. 4. Paraffin Sections: Deparaffinization and rehydration. Wash the slide with pure water or PBS for 3 times, 3 minutes each time. Then perform antigen retrieval. Fixation 1. Fix the cell coverslips/spots or tissue sections at room temperature using a fixative such as 4% paraformaldehyde (4% PFA) for 10-15 minutes. 2. Wash the sample with PBS for 3 times, 3 minutes each time. Permeabilization 1.Add a detergent such as 0.1–0.3% Triton X-100 to the sample and incubate at room temperature for 10–20 minutes. (Note: This step is only required for intracellular antigens. For antigens expressed on the cell membrane, this step is unnecessary.) Wash the sample with PBS for 3 times, 3 minutes each time. Blocking Add blocking solution and incubate at room temperature for at least 1 hour. (Common blocking solutions include: serum from the same source as the secondary antibody, BSA, or goat serum.) Note: Ensure the sample remains moist during and after the blocking step to prevent drying, which can lead to high background. Immunofluorescence Staining (Day 1) 1. Remove the blocking solution and add the diluted primary antibody. 2. Incubate the sample in a humidified chamber at 4°C overnight. Immunofluorescence Staining (Day 2) 1. Remove the primary antibody and wash with PBST for 3 times, 5 minutes each time. 2. Add the diluted fluorescent secondary antibody and incubate in the dark at 4°C for 1–2 hours. 3. Remove the secondary antibody and wash with PBST for 3 times, 5 minutes each time. 4. Add diluted DAPI and incubate at room temperature in the dark for 5–10 minutes. 5. Wash with PBST for 3 times, 5 minutes each time. Mounting 1. Mount the sample with an anti-fade mounting medium. 2. Allow the slide to dry at room temperature overnight in the dark. 3. Store the slide in a slide storage box at 4°C, protected from light.

Experimental Protocol:

Sample Preparation

1. Adherent Cells: Place a clean, sterile coverslip in a culture dish. Once the cells grow to near confluence as a monolayer, remove the coverslip for further use.

2. Suspension Cells: Seed the cells onto a clean, sterile slide coated with poly-L-lysine.

3. Frozen Sections: Allow the slide to thaw at room temperature. Wash it with pure water or PBS for 2 times, 3 minutes each time.

4. Paraffin Sections: Deparaffinization and rehydration. Wash the slide with pure water or PBS for 3 times, 3 minutes each time. Then perform antigen retrieval.

Fixation

1. Fix the cell coverslips/spots or tissue sections at room temperature using a fixative such as 4% paraformaldehyde (4% PFA) for 10-15 minutes.

2. Wash the sample with PBS for 3 times, 3 minutes each time.

Permeabilization

1.Add a detergent such as 0.1–0.3% Triton X-100 to the sample and incubate at room temperature for 10–20 minutes.

(Note: This step is only required for intracellular antigens. For antigens expressed on the cell membrane, this step is unnecessary.)

Wash the sample with PBS for 3 times, 3 minutes each time.

Blocking

Add blocking solution and incubate at room temperature for at least 1 hour. (Common blocking solutions include: serum from the same source as the secondary antibody, BSA, or goat serum.)

Note: Ensure the sample remains moist during and after the blocking step to prevent drying, which can lead to high background.

Immunofluorescence Staining (Day 1)

1. Remove the blocking solution and add the diluted primary antibody.

2. Incubate the sample in a humidified chamber at 4°C overnight.

Immunofluorescence Staining (Day 2)

1. Remove the primary antibody and wash with PBST for 3 times, 5 minutes each time.

2. Add the diluted fluorescent secondary antibody and incubate in the dark at 4°C for 1–2 hours.

3. Remove the secondary antibody and wash with PBST for 3 times, 5 minutes each time.

4. Add diluted DAPI and incubate at room temperature in the dark for 5–10 minutes.

5. Wash with PBST for 3 times, 5 minutes each time.

Mounting

1. Mount the sample with an anti-fade mounting medium.

2. Allow the slide to dry at room temperature overnight in the dark.

3. Store the slide in a slide storage box at 4°C, protected from light.

Datasheet & SDS

生物学的記述

Specificity
Integrin α4 Rabbit mAb recognizes endogenous levels of total integrin α4 protein.

Synonym(s)
CD49d,Integrin alpha 4/CD49D,Integrin alpha4,Integrin α4

Clone
L4P6

Background
Integrin α4 (CD49d), encoded by the ITGA4 gene, is a transmembrane adhesion receptor that forms heterodimers with β1 (α4β1/VLA-4) or β7 (α4β7), mediating cell-cell and cell-ECM interactions. Structurally, it consists of a large extracellular domain that binds ligands like VCAM-1 and fibronectin, a single transmembrane helix, and a short cytoplasmic tail that interacts with intracellular signaling proteins such as paxillin. Integrin α4 is expressed on immune cells (lymphocytes, monocytes, eosinophils), endothelial cells, and hematopoietic stem cells, playing a crucial role in immune surveillance, inflammation, and cell migration. Functionally, it regulates immune cell adhesion, trafficking, and signaling pathways that influence cytoskeletal organization and survival. Its role in immune responses, inflammation, and embryonic development makes it a key therapeutic target for autoimmune diseases, inflammatory disorders, and cancer.

Background

Integrin α4 (CD49d), encoded by the ITGA4 gene, is a transmembrane adhesion receptor that forms heterodimers with β1 (α4β1/VLA-4) or β7 (α4β7), mediating cell-cell and cell-ECM interactions. Structurally, it consists of a large extracellular domain that binds ligands like VCAM-1 and fibronectin, a single transmembrane helix, and a short cytoplasmic tail that interacts with intracellular signaling proteins such as paxillin. Integrin α4 is expressed on immune cells (lymphocytes, monocytes, eosinophils), endothelial cells, and hematopoietic stem cells, playing a crucial role in immune surveillance, inflammation, and cell migration. Functionally, it regulates immune cell adhesion, trafficking, and signaling pathways that influence cytoskeletal organization and survival. Its role in immune responses, inflammation, and embryonic development makes it a key therapeutic target for autoimmune diseases, inflammatory disorders, and cancer.

References
[1] Campbell ID, et al. 2011 Mar 1;3(3):a004994.

PVDFメンブレン孔径参考表

Protein Size (kDa)	PVDF Transfer Membrane Pore Size (μm)
< 10	0.22
10-20	0.22
20-30	0.45
30-45	0.45
45-70	0.45
80-100	0.45
100-140	0.45
> 140	0.45

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

* 大学・企業名 大学・企業名を記入してください

* 名前 名前を記入してください

* 電子メール 電子メール・アドレスを記入してください 有効なメールアドレスを入力してください

電話番号

* 内容 お問い合わせ内容をご入力ください

Protein Size (kDa)	Separating Gel Percentage
4-40	20%
12-45	15%
10-70	12.5%
15-100	10%
25-100	8%
60-210	5%