NELFe Rabbit mAb

Catalog No.: F2780

当該製品は品切れ状态で、ごメールアドレスを教えていただければ、在庫があると、メールで顧客様に伝えます。

您「在庫のお知らせ」をクリックして、ごメールアドレスを入力していただくと、10％の割引を取得することができます。

使用情報

Dilution
WB1:1000 IP1:10-1:100 IF1:500 FCM1:300

Application
WB, IP, IF, FCM

Source
Rabbit

Reactivity
Human, Mouse, Rat

Storage Buffer
PBS, pH 7.2+50% Glycerol+0.05% BSA+0.01% NaN3

Storage (from the date of receipt)
-20°C (avoid freeze-thaw cycles), 2 years

Predicted MW Observed MW
43 kDa 44 kDa
^*なぜ予測分子量と実際の分子量が異なるのか？下記の原因により、実際の分子量が予測と異なる：タンパク質の翻訳後修飾（リン酸化/糖鎖付加），スプライシングバリアント，イソフォーム，相対的な電荷，ポリマー。

プロトコール

IF
Experimental Protocol: Sample Preparation 1. Adherent Cells: Place a clean, sterile coverslip in a culture dish. Once the cells grow to near confluence as a monolayer, remove the coverslip for further use. 2. Suspension Cells: Seed the cells onto a clean, sterile slide coated with poly-L-lysine. 3. Frozen Sections: Allow the slide to thaw at room temperature. Wash it with pure water or PBS for 2 times, 3 minutes each time. 4. Paraffin Sections: Deparaffinization and rehydration. Wash the slide with pure water or PBS for 3 times, 3 minutes each time. Then perform antigen retrieval. Fixation 1. Fix the cell coverslips/spots or tissue sections at room temperature using a fixative such as 4% paraformaldehyde (4% PFA) for 10-15 minutes. 2. Wash the sample with PBS for 3 times, 3 minutes each time. Permeabilization 1.Add a detergent such as 0.1–0.3% Triton X-100 to the sample and incubate at room temperature for 10–20 minutes. (Note: This step is only required for intracellular antigens. For antigens expressed on the cell membrane, this step is unnecessary.) Wash the sample with PBS for 3 times, 3 minutes each time. Blocking Add blocking solution and incubate at room temperature for at least 1 hour. (Common blocking solutions include: serum from the same source as the secondary antibody, BSA, or goat serum.) Note: Ensure the sample remains moist during and after the blocking step to prevent drying, which can lead to high background. Immunofluorescence Staining (Day 1) 1. Remove the blocking solution and add the diluted primary antibody. 2. Incubate the sample in a humidified chamber at 4°C overnight. Immunofluorescence Staining (Day 2) 1. Remove the primary antibody and wash with PBST for 3 times, 5 minutes each time. 2. Add the diluted fluorescent secondary antibody and incubate in the dark at 4°C for 1–2 hours. 3. Remove the secondary antibody and wash with PBST for 3 times, 5 minutes each time. 4. Add diluted DAPI and incubate at room temperature in the dark for 5–10 minutes. 5. Wash with PBST for 3 times, 5 minutes each time. Mounting 1. Mount the sample with an anti-fade mounting medium. 2. Allow the slide to dry at room temperature overnight in the dark. 3. Store the slide in a slide storage box at 4°C, protected from light.

Experimental Protocol:

Sample Preparation

1. Adherent Cells: Place a clean, sterile coverslip in a culture dish. Once the cells grow to near confluence as a monolayer, remove the coverslip for further use.

2. Suspension Cells: Seed the cells onto a clean, sterile slide coated with poly-L-lysine.

3. Frozen Sections: Allow the slide to thaw at room temperature. Wash it with pure water or PBS for 2 times, 3 minutes each time.

4. Paraffin Sections: Deparaffinization and rehydration. Wash the slide with pure water or PBS for 3 times, 3 minutes each time. Then perform antigen retrieval.

Fixation

1. Fix the cell coverslips/spots or tissue sections at room temperature using a fixative such as 4% paraformaldehyde (4% PFA) for 10-15 minutes.

2. Wash the sample with PBS for 3 times, 3 minutes each time.

Permeabilization

1.Add a detergent such as 0.1–0.3% Triton X-100 to the sample and incubate at room temperature for 10–20 minutes.

(Note: This step is only required for intracellular antigens. For antigens expressed on the cell membrane, this step is unnecessary.)

Wash the sample with PBS for 3 times, 3 minutes each time.

Blocking

Add blocking solution and incubate at room temperature for at least 1 hour. (Common blocking solutions include: serum from the same source as the secondary antibody, BSA, or goat serum.)

Note: Ensure the sample remains moist during and after the blocking step to prevent drying, which can lead to high background.

Immunofluorescence Staining (Day 1)

1. Remove the blocking solution and add the diluted primary antibody.

2. Incubate the sample in a humidified chamber at 4°C overnight.

Immunofluorescence Staining (Day 2)

1. Remove the primary antibody and wash with PBST for 3 times, 5 minutes each time.

2. Add the diluted fluorescent secondary antibody and incubate in the dark at 4°C for 1–2 hours.

3. Remove the secondary antibody and wash with PBST for 3 times, 5 minutes each time.

4. Add diluted DAPI and incubate at room temperature in the dark for 5–10 minutes.

5. Wash with PBST for 3 times, 5 minutes each time.

Mounting

1. Mount the sample with an anti-fade mounting medium.

2. Allow the slide to dry at room temperature overnight in the dark.

3. Store the slide in a slide storage box at 4°C, protected from light.

Datasheet & SDS

生物学的記述

Specificity
NELFe Rabbit mAb recognizes endogenous levels of total NELFe protein.

Clone
G13P13

Background
NELFe (Negative Elongation Factor E) is a key component of the NELF complex that regulates transcriptional pausing by inhibiting RNA polymerase II (Pol II) elongation. It is a 380-amino-acid protein encoded by the NELFE gene and contains an N-terminal leucine zipper (LZ) motif for dimerization, a central Arg-Asp-rich (RD) domain, and a C-terminal RNA recognition motif (RRM) that preferentially binds RNA over DNA. NELFe is expressed in the nucleus, where it interacts with other NELF subunits (NELF-A, NELF-B, NELF-C/D) and DSIF to maintain transcriptional pausing, which is reversed by P-TEFb. Beyond transcription, NELFe is recruited to double-strand breaks (DSBs) near active genes in a PARP-1-dependent manner, supporting transcriptional repression and DNA repair. Its role in gene regulation has implications for diseases linked to dysregulated transcription, such as cancer and immunodeficiency, making it a potential target for therapeutic intervention.

Background

NELFe (Negative Elongation Factor E) is a key component of the NELF complex that regulates transcriptional pausing by inhibiting RNA polymerase II (Pol II) elongation. It is a 380-amino-acid protein encoded by the NELFE gene and contains an N-terminal leucine zipper (LZ) motif for dimerization, a central Arg-Asp-rich (RD) domain, and a C-terminal RNA recognition motif (RRM) that preferentially binds RNA over DNA. NELFe is expressed in the nucleus, where it interacts with other NELF subunits (NELF-A, NELF-B, NELF-C/D) and DSIF to maintain transcriptional pausing, which is reversed by P-TEFb. Beyond transcription, NELFe is recruited to double-strand breaks (DSBs) near active genes in a PARP-1-dependent manner, supporting transcriptional repression and DNA repair. Its role in gene regulation has implications for diseases linked to dysregulated transcription, such as cancer and immunodeficiency, making it a potential target for therapeutic intervention.

References
[1] Awwad SW, et al. EMBO Rep. 2017 May;18(5):745-764.

PVDFメンブレン孔径参考表

Protein Size (kDa)	PVDF Transfer Membrane Pore Size (μm)
< 10	0.22
10-20	0.22
20-30	0.45
30-45	0.45
45-70	0.45
80-100	0.45
100-140	0.45
> 140	0.45

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

* 大学・企業名 大学・企業名を記入してください

* 名前 名前を記入してください

* 電子メール 電子メール・アドレスを記入してください 有効なメールアドレスを入力してください

電話番号

* 内容 お問い合わせ内容をご入力ください

Protein Size (kDa)	Separating Gel Percentage
4-40	20%
12-45	15%
10-70	12.5%
15-100	10%
25-100	8%
60-210	5%